China Chain Pipe Wrench Chain Tongs>= 1 Pieces with Hot selling

Merchandise Description

Chain pipe wrench Chain tongs

Merchandise Description

 Specification:

1. The chain encloses the pipe so that the chain shaft enters the bayonet and rotates the handle to rotate the pipe.

two. Protect your lifestyle and property, please do not overload it.

3. This merchandise is intended for use only as a rotating pipe, no other function.

4. Chain pipe wrenches with requirements of 900mm, 1000mm, 1200mm and 1300mm, the jaws can be rotated 180 degree for set up.

5. Please spend attention to rust avoidance.

6. Product common as GB1200 Chain Pipe Wrench.

 

Merchandise

Chain length

Max. managing dimension

Rated torque

one

300mm

50mm

300N.m

2

900mm

100mm

830N.m

3

1000mm

150mm

1230N.m

four

1200mm

200mm

1480N.m

5

1300mm

250mm

1680N.m

Thorough Pictures

Packaging & Shipping

 

Business Profile

Lake Petro is found in HangZhou Metropolis, which is well-known for CZPT Oilfield and the largest production hub of petroleum gear in China. Following the principle of “good quality initial, science and technology innovated, folks oriented”, each and every Lake Petro particular person is sparing no energy to offer the buyers with very best merchandise and solutions. Our merchandise are dependent on advanced production line and screening gear, our merchandise are developed and created in accordance to certification of API, ISO, GOST, and so forth.

FAQ

The data you may like to know just before buy:

 1. Methods of Payment:

  T/T (Telegraphic Transfer) or Western Union or L/C at sight

two. Handling time for an buy

  Based mostly on get quantity, typically it will take twenty five days for generation.

  Only 2 or 3 days if we have inventory on your request size.

3. Shipping way

  Sample buy: we propose Courier specific like DHL/UPS/TNT/FEDEX or by air

  Bulk purchase: we advise by air or by sea.

4. Quality Control

  We have our possess knowledgeable QC.

  There will be rigorous inspection and tests for every get before delivery out.

5. After Companies:

  1. Our sales team will response for your query inside 24 hrs (Holiday seasons Excluded)

  2. Technological Support will be obtainable in any time

  3. Totally free replacement will offer after the failure verified triggered by our product good quality

 

 

US $262
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: Online Guide and Service
Warranty: 1 Year
Certification: CE, ISO 9001:2000, ISO 9001:2008, API
Standard: AISI
Surface Treatment: Without Processing
Manufacturing Process: Forging

###

Samples:
US$ 262/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Item

Chain length

Max. handling size

Rated torque

1

300mm

50mm

300N.m

2

900mm

100mm

830N.m

3

1000mm

150mm

1230N.m

4

1200mm

200mm

1480N.m

5

1300mm

250mm

1680N.m

US $262
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: Online Guide and Service
Warranty: 1 Year
Certification: CE, ISO 9001:2000, ISO 9001:2008, API
Standard: AISI
Surface Treatment: Without Processing
Manufacturing Process: Forging

###

Samples:
US$ 262/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Item

Chain length

Max. handling size

Rated torque

1

300mm

50mm

300N.m

2

900mm

100mm

830N.m

3

1000mm

150mm

1230N.m

4

1200mm

200mm

1480N.m

5

1300mm

250mm

1680N.m

Roller Chain Basics

Before choosing the right roller chain for your machine, it is necessary to learn some basics. Learn about sprockets, tensile strength, pitch, and width. Read this article to learn more. It will help you make an informed decision. Getting the right product is critical, but it’s not always as simple as choosing a brand name. You need to choose a company that supports its products and provides good service.
chain

Roller sprocket

If you are planning to purchase roller sprockets for your application, you should first look at the various types available. Sprockets available for single-strand roller chains are manufactured by Boston Steel – Type B sprockets are drilled to size. They are available in 1/4, 3/8, 1/2, 5/8, 3/4 and 1″ pitch sizes.
The diameter of the sprocket is important when choosing the right sprocket for your application. Using a caliper to measure the diameter of a toothless plate is a good way to determine the exact size of the sprocket. A caliper is the diameter of a plate without teeth. On Type B and C sprockets, the hub diameter measures the thickness of the hub.
Another type of sprocket is the steel split sprocket, which is split in diameter. This type is easy to install and remove, and is held together by bolts in the hub. Typically, split sprockets have chain pitches ranging from 40 to 240 and bores ranging from 3/4″ to 6″. The split sprockets are designed with one pointing towards the ceiling and the other two parallel to the floor.
When shopping for sprockets, it is important to remember that they are designed specifically for a specific chain. All chains are manufactured to specific standards. In the United States, the most common standard is ANSI. The chain pitch is the distance between the center of each pin and the center of the next pin. In the US, the standard is always measured in eight-inch intervals.
In addition to sprocket size, sprocket pitch and the surface area also affect chain life. Unlike belt sprockets, which are made of forged steel, the teeth on roller sprockets are stamped from steel sheet or pressed from powdered metal. The harder the teeth, the longer the chain will last.

Roller chain pitch

The pitch of a roller chain is the distance between the sprocket and the pin. The smaller the thread pitch, the smaller the bushing wear. Generally speaking, the smaller the pitch, the longer the life of the chain. For best performance and longest life, manufacturers recommend a minimum chain pitch of 2% to 3%. Chain pitch is important to ensure proper performance, and the manufacturer recommends that you replace the chain when it reaches 2% to 3% of normal.
To determine the correct chain pitch for a particular chain, first determine the sprocket size and pitch. Pitch is the distance between pin centers, measured in 1/8 inch increments. The pin diameter of the chain is also important. If you’re not sure about the pin diameter of your chain, measure a few links to get a good average reading. Alternatively, use a caliper to measure the inside diameter of the sprocket and count the number of teeth.
When sizing a sprocket, measure the chain between the gears with a caliper and compare it to the measurements on the chain size chart. Make sure you have checked all the specs and checked the correct chain pitch. Then, choose the correct chain pitch for your needs. This is a critical step in choosing the right chain. So get the correct pitch for your roller chain. Correct pitch helps ensure maximum performance and safety.
To identify a specific type of roller chain, measure its tensile strength. This represents the amount of load the chain can withstand before breaking. Another key parameter to consider is fatigue strength. Chains with high fatigue strength are more resistant to rust and wear than chains with low fatigue strength. The numbers on the right in the standard numbering represent normal or light duty chains, while the numbers on the left represent the pitch of heavy-duty chains.
Double pitch roller chains are a variant of single pitch chains. They are manufactured according to ISO 606 and meet the same standards as single pitch chains. They are mainly used in applications with lower requirements for speed and power transmission. The plates of double pitch roller chains are also longer than single pitch chains. The double pitch drive series is also used for elevator and long conveyor drives. There are three main types of roller chains: single-pitch chains, double-pitch carriers, and oversized rollers.

Roller chain width

When buying a roller chain, one of the first decisions you must make is its width. To make this determination, you need to measure the overall width of the chain, the diameter, and the width of each roller. You must also know the height and thickness of the board. After taking these measurements, you can start shopping for the perfect roller chain. But before you buy a new chain, it’s important to know what to expect from the chain itself.
There are many different types of roller chains. These chains are available for ANSI and metric measurements. They come in single-stranded and double-stranded variants. They are usually used for power transmission. Other types include agricultural, automotive, conveyor, multi-strand, and four-strand chains. These charts also include a chart so you can easily see the exact size you need. Listed below are some of the benefits of buying a roller chain.
Roller diameter and pin diameter are important factors in choosing the correct chain width. The width of the chain is the nearest binary fraction of 5/8 of an inch. It should be at least half the thickness of the sprocket, and the plate thickness is one-eighth the width of the chain. Overweight chains are indicated with the suffix H. The pitch and width of the chain are determined by the working load and machine speed.
The outer links of the roller chain are called pin links. These pins are inserted into the bushings of the adjacent roller links. They are held in place by cotter pins. Pin links are usually pressed into the pins of heavy-duty chains. These pins are used to hold the rollers in place. However, these pin chains can reduce the power rating of roller chains by up to 20%.
The ANSI 29.1 Steel Chain Specification specifies a minimum pitch in inches and ultimate strength of 12,500 x pitch in inches. At the same time, the O-ring chain greatly reduces wear due to its lubricating effect. O-ring and X-ring chains contain a lubricant injected by vacuum when riveting the chain together. Transmission chains are tested and governed by standards bodies such as ANSI. In 2011, the American Society of Mechanical Engineers developed a standard for precision power transmission chains.
chain

Roller chain tensile strength

One of the most important indicators of roller chain strength is tensile strength. This measurement refers to the amount of load the chain can withstand before breaking. Another measure, called fatigue strength, refers to the maximum load a chain can withstand before it breaks. The strength of a roller chain depends on its size, the quality of the steel used in its construction, and the heat treatment. There are also differences in the types of shot peening used to treat steel, pitch holes, and link plates.
When choosing a roller chain, the workload is critical. This is the maximum load the chain can withstand before fatigue failure occurs. This measurement is critical because it helps determine the type of load applied to the chain. When deciding which roller chain to buy, be sure to consider the mechanical type and desired strength. Then, make sure it meets strength and load-carrying capacity requirements.
The ultimate tensile strength of a roller chain is based on the manufacturer’s recommended maximum tensile strength. However, the actual tensile strength may be higher or lower than this value. The working load limit of a roller chain can also be calculated by multiplying the chain diameter by the grade. The working load limit of a chain is the highest tension it can withstand before breaking. This value is usually expressed in points.
The maximum tensile strength of roller chains varies by chain type. The single-strand heavy chain has thick side plates for higher shock loads. Single strand heavy-duty roller chains, also known as “bushing” roller chains, are also available. Double-stranded heavy chains are structurally similar, but they have two layers of steel connected by pins that are nearly twice as strong as standard roller chains.
The tensile strength of a single-strand roller chain is approximately 500 tons. In comparison, a single-chain blockchain has a tensile strength of 900. The tensile strength of the two is similar, and it is not recommended to choose one or the other. Although steel and titanium chains are considered the strongest materials for roller chains, these materials are not magnetic.

= 1 Pieces with Hot selling”>= 1 Pieces with Hot selling”>
editor by czh 2022-12-20